We sure do! https://www.apx.tech/tutorials/

Negative. The memory and storage are part of the SBC. If you want to run Windows, Linux, or ChromeOS from an OPS, that is absolutely possible.

Yes you can. Not necessarily recommended though.

Here’s how:

1. Put the APK file on a FAT32 formatted USB drive.
2. Using the remote control press “Input > 1 > 3 > 7 > 9.
3. Go to “Android Setting” and change “Unknown Sources” to “On”.
4. Browse to the APK and double tap.

Absolutely you can! You have full access to the Google Play Store for all your apps. All Google apps are then tied to your user profile login so that you have full access to your presentations and lessons.

Check the Admin menu for debugging, administration of settings, and troubleshooting.

There are the following type of locks that users can enable:

• Touch Lock – enabled or disabled in the IFP Admin menu, or by using the red button on the remote control to lock it (pressing red button again unlocks it).
• USB Lock – enabled in the IFP Admin menu – Android setting – USB key lock, unlock it by pressing the remote red button or USB unlock file.
• Lock Screen password – enabled in the Android settings – System – Lock Screen password (as the picture below), unlock it by using the PIN code when you enabled it or you can reset the password by pressing “0214” on the remote.
• Advanced Lock password – enabled in the Android settings – System – Lock Screen password. There are some settings if you want only accessed by admin user. Here is the key file. Please put the file on the root directory of a FAT32 formatted USB disk and plug into the USB port of IFP.
• Key File

Remove the two small screws from the plate on the bottom of the IFP. You simply then insert the USB Wi-Fi module. This module also contains the Bluetooth connection capability.

If you cast the full screen from your touch enabled device to the IFP, you can utilize the touch function from the IFP back to your device. This allows you to cast to the IFP and control the casting device as if it was one large tablet.

Touch does not work if you only cast specific tabs or applications. It must be the entire screen being cast.

1. Using the remote control press “Input > 1 > 3 > 7 > 9.
2. Go to “Machine Setting”
3. Enable or disable both InLink (CEC) and Sound ARC here.

Toggle

SMTP Configuration and Network Considerations

• Corporate Email Restrictions:

  • Many corporate email servers and firewalls disable SMTP to prevent unauthorized email sending.
  • Consult your IT Administrator to ensure SMTP access is allowed.

• SMTP Settings for Popular Email Providers:

  • Gmail SMTP Settings:
    
    • Gmail Support – SMTP Setup
    • Gmail SMTP Configuration Guide
  • Outlook 365 SMTP Settings:
    
    • Microsoft Exchange Online – SMTP Submission

• Configuration Steps:

  1. Ensure your network, firewall, and SMTP server allow the necessary settings.
  2. Enter the SMTP details in IFP Settings > System > Email.

Content

IFP has Kiosk mode that basically removes the app bar so there is no short-cuts to different application ideal for KIOSK type setup where admin’s don’t want user’s to do more. Instruction is: Using the remote control, press “menu” ,”7″, “9”, “1”, “3” – the sidebars will toggle on/off.

All are supported on Apex. You can access the settings in the Bytello Share settings. Here is how:

https://www.apx.tech/video/bytello-share-ifp-settings/